Pre Cognition Metaverse 2.1

Bringing Skynet to the masses

[RELEASE] ShinTo Kernel “SecondReality” V40A06

by · Published · Updated

CREDITS & THANK YOU

Without the hard work of everyone here (hope I don’t forget anyone!) ShinTo would not exist, so sincerest thank you to all of you that inspire countless people to follow your path!

– yank555 (many cool enhancements & Great GitHub!!)
– wootever
– faux123 (also many cool enhancements & Great GitHub!!)
– myfluxi (amazing github with loads of patches!)
– Andreilux (Synapse app.)
– Civato for all kernel, Synapse & installer work!
– FrozenCow (DriveDroid Patch + App).
– CodeAurora contributors (too many great ppl contributing patches & enhancements).
– Imoseyon.
– UpInTheAir.
– CI3Kener.
– Dorimanx.
– Showp1984.
– Neobuddy89.
– Megaflop666. (Amazing help & Beta Tester; he is everywhere! …superpowers?)
– Yoann. (Great beta tester & a pioneer!)
– All the great guys from “ShinTo Kernel” CLOSED THREAD at xda
– All the great guys from “ShinTo Kernel” thread at HTCMANIA 🙂
– Other great people all around the world that contribute Linux Kernel Patches!

Everyone else I might have forgotten, please let me know and I’ll update the post! 😉

DISCLAIMER

Although I have been running this version of the kernel for about two weeks now as my daily driver, and I test everything in real life, I take no responsibility if the phone has an issue, scares your cat, drops the job interview call of your life or makes you fight with your neighbor 😉

DOWNLOAD

Shinto_Logo_Kernel

Please don’t direct link the zip file.

If you would like to include ShinTo Kernel in your rom, you’re more than welcome; just give everyone credit and include PreCog.me as the site for ShinTo Kernel.

I really hope you enjoy ShinTo Kernel (as I have been), and I would advise you to subscribe to PreCog.me for more goodies to come (specialized software, articles, diy, news, etc)

  1. ShinTo Kernel SecondReality V40A06 for N9005 (EUR/EUROPE).
  2. ShinTo Kernel SecondReality V40A06 for N900T (TMO/T-Mobile USA).

CHANGELOG

  • Added back “Defibrillator” failsafe code that takes care of the SOD that some of you have. Sorry about that, it seems in my infinite wisdom I somehow commented out that code…Still scratching my head as to why…?

KNOWN ISSUES

  • Synapse: mic volumes reset to -84 the first time you launch synapse but I have included code to reset it to 0. You only have to accept and it will reset to 0.
  • Synapse: Fast charge; For values to stick across reboot, you HAVE to UNCHECK “FAILSAFE” at the bottom of the screen in “FAST CHARGE”.
  • ShadowLED: Works without issues once you deselect led notifications from the ROM settings.
  • VIPER4ANDROID: When you first start your phone, viper4android is off. To fix, you have to launch viper4android so it restarts it’s engine. That issue happens if you have eXpanD activated.

SUPPORT

  • Absolutely NO kind of support will be given here if you happen to have any issue while you are Overclocked or Undervolted.
  • If you encounter an issue then you will have to reset to stock manufacturer sanctioned settings (300 Mhz to 2.230 Mhz & stock voltages), remove ANY/ALL scripts in /etc/init.d/and reproduce the issue with all debugging turned on (Go to Synapse “SYSTEM DEBUG”).
  • Once you reproduce the issue with stock settings, ZIP the two “ShinTo” log files in the root of your sdcard (/sdcard/) and send us a link to download said .ZIP file with a detailed description of your issue, Note3 model, rom name & version along with what you were doing when the issue happened.
  • IF YOU HAVE ISSUES BUT CAN’T PRODUCE A VALID LOGFILE, DON’T BOTHER REPORTING THEM AS I CAN’T GUESS WHAT YOUR PROBLEMS ARE.

 

 

 

Tags:

You may also like...

120 Responses

  1. flak0 says:
    March 4, 2015 at 2:11 am

    Awesome getting ready to flash now

  2. dieselford says:
    March 4, 2015 at 4:03 am

    Can’t wait brother! Definitely going to run this! Being that I had SOD issues, I couldn’t use V40A02. Thanks as always for the time and effort you putinto this masterpiece!

  3. Bogeyof says:
    March 4, 2015 at 1:21 pm

    I tested V40A05 and now V40A06 for round about 3 days now and didn’t have one SOD or Reboot until now. With former version V40A02, I had massive problems with SOD´s and some Reboots, but now it seems real good and stable for me. Many thanks and “thumbs up”!!!

  4. RvZaXXo says:
    March 5, 2015 at 11:04 am

    I really want to use this kernel but i dont know if it work correctly with CM12 on my note 3 n9005.

  5. ravneillal says:
    March 5, 2015 at 11:07 am

    I know this kernel is meant for touchwiz roms but i want to give it a try with CM12 on my note 3 n9005. Will it work without any major issues or am i going to screw things up?

  6. Danny says:
    March 6, 2015 at 7:13 am

    Has anybody tried screen mittoring with this new version?

  7. 6h0st says:
    March 7, 2015 at 10:38 am

    Kernel is working with no problems. Great job, love it! Thanks for sharing.

  8. 6h0st says:
    March 7, 2015 at 10:46 am

    This Kernel version is working great. No reboots and burst shot started working again. Great job! And thanks for sharing.
    Can i activate msm thermal to control cpu temperature with precog governor, or is just pointless? My phone gets extremely hot. I think i can fry eggs on it when playing games. Or is there another way to control temp parameters (CPU-GPU throttling)?

    • iamskynet says:
      March 7, 2015 at 10:50 am

      It gets hot because PrecoGov is managing the temperature per core in real time and is giving you a lot more power than if it was managed by msm thermal. I think the best for gaming would be to use another governor til PrecoGov 2.0 is released.

  9. 6h0st says:
    March 8, 2015 at 10:13 am

    Lowering CPU frequency to 1.6 helps with the heat problem in heavy games.
    Still waiting for Precog v2…. 🙂

  10. amir says:
    March 9, 2015 at 5:29 pm

    Hi

    I flash your kernel and use governor PrecoGov but because battery consumption is high?

    tnx

  11. josue says:
    March 10, 2015 at 10:48 am

    Hello and thanks for your work, i have a question, can install this in my n900w8?

  12. Tommy says:
    March 10, 2015 at 9:40 pm

    Would this work with the new 5.0 lollipop that was just released for the n900t?

  13. binnns says:
    March 10, 2015 at 11:24 pm

    I have rogers 900w8 and this kernel works amazing no problems to report

  14. Mta28nry says:
    March 10, 2015 at 11:45 pm

    Hey man, ive been on your kernel for the longest time, and I really appreciate what you do. Everything you have accomplished is exactly what I personally want in a kernel. I was wondering would this in anyway work with the note 4 and if not, do you think you’ll ever create one for it?

    • iamskynet says:
      March 11, 2015 at 11:00 am

      Thank you for such kind words! I usually don’t have a sense of how many ppl are running ShinTo Kernel, so it’s good to know 🙂
      As for the note4, I don’t have one but maybe in the future I could look into it and develop for it; that would mean incorporate all the specific and exclusive ShinTo Kernel parts.

  15. MMo says:
    March 12, 2015 at 4:43 am

    I’m on Tweaked 3.95 Note3 T-Mobile. The new update seems stable. No SOD. I use the Interactive gov. because it’s very good on battery life. It’s been 24hrs w/regular use, minimal background processes running, no added kernel tweaks, and still have 96% charge. On PreCog gov it seems to drain the battery faster in 24hrs. with the same amount of use, and I would be at 75% charge. Not sure what’s causing it.

  16. Zhobotero says:
    March 13, 2015 at 7:14 pm

    have you seen this man? http://forum.xda-developers.com/android/apps-games/led-music-effect-rooted-device-t3053295

    more like its your shadowled but for music tho

    • iamskynet says:
      March 13, 2015 at 7:32 pm

      Nice idea and thx for reporting.
      The led can be freely accessed and used in a variety of ways to do some cool stuff.
      I presume the developer is accessing the kernel led device and programming it to the beat of the tunes or something like that.

      • Zhobotero says:
        March 13, 2015 at 8:22 pm

        I see, so there so many pretty things that notification led can do. How about on touching the screen like tap, pinch in and out, swipe and multi touch.. LoL! just joking. haha. time to sleep man, already 2:20A here.

  17. jd says:
    March 21, 2015 at 5:48 am

    Thank you sooooo much!!! It’s hard to find a KK kernel which is updated frequently nowadays. Keep going bro!!! Like for you!

  18. Darth_kadd says:
    April 6, 2015 at 11:38 pm

    So I guess it’s safe to assume shinto kernel won’t be seeing any lollipop support ?

    • iamskynet says:
      April 6, 2015 at 11:38 pm

      I wonder what makes you think that…?

      • Darth_kadd says:
        April 16, 2015 at 6:32 pm

        I haven’t seen you post any articles or any information at all regardinga a new lollipop kernel although official sources have been available for over a month now. I’m just inquiring about your progress on it

        • iamskynet says:
          April 16, 2015 at 6:38 pm

          Please read my previous comments here or check my twitter status. Basically I’ve been out of the game for about a month due to some urgent family issues I had to take care of.
          Since Wednesday I am back home and will shortly start working on ShinTo Kernel for LP (and KK) also.

          As a matter of fact, it has been a month since I last read any kind of news about the scene so I have to catch up on that too…

  19. Vitor says:
    April 7, 2015 at 4:55 am

    Please @iamskynet, support us a bit more on the Kitkat version of this great kernel… I don’t really want to go ahead to Lollipop =/ of course I understand you could release for it anytime but what I ask for you is that you brings more news, more releases for Kitkat. Let me thank you for all your nice job you ever made till now.

  20. julk77 says:
    April 14, 2015 at 2:16 pm

    Hi, thanks a lot for your kernel, it is working quite good !
    I have one question, I realized that I have to set the mic volumes each time I reboot my phone. Is there a way to have these set once and for all ?

    • iamskynet says:
      April 14, 2015 at 2:31 pm

      You welcome. It has to do with an issue with Synapse. For now I’m afraid you will have to set it up each time you reboot.

      • julk77 says:
        April 15, 2015 at 1:19 am

        Thanks, no problem at all since I’m not rebooting my device so often.
        I have one extra question, I have read that you added back the cifs module in the v40a02, is this really the case ? I have tried to have cifsmanager working during one hour with no luck 🙁

  21. julk77 says:
    April 15, 2015 at 4:50 pm

    Actually, I’m using the latest release. I’m an Android/linux newbee, the command lsmod bring some error, how can I check if the cifs module is there? Should it be an external .ko or integrated into the kernel?
    Thanks!

  22. Mocji says:
    May 16, 2015 at 11:07 pm

    Will you continue updating Shinto?

  23. scv13 says:
    May 18, 2015 at 1:05 pm

    I was using a different phone, and set up n9005. It was all good. I checked all except telephony. I installed the SIM card and started to use n9005 (V40A06) immediately got a lot of problems. 1-5 of SOD in a day and 0-2 reboot. I didn’t change anything in the kernel configuration. ROM X-Note 21.

  24. Pwnbuggy says:
    May 20, 2015 at 1:27 pm

    Where can I post my shinto log files for u to look at im getting random crashes and freezes lately and haveny changed a thing in my phone

    • CeKMTL says:
      May 20, 2015 at 1:29 pm

      That’s weird if before it wasn’t giving those issues and now it is; something must have changed.
      Soon there will be a forum at http://www.precog.me to have everything structured and tidy.

      • kevp75 says:
        May 22, 2015 at 3:39 pm

        Hey man, I have a quick one for ya. I have this on my wifes note, and she doesnt like the shadowled, but because she’s not tech savvy I dumped Synapse (so she couldnt screw anything up LOL)

        Is there a way I can turn off the shadowled, via a shell script I can throw in her init.d folder (I know it won’t execute until post boot)

        • CeKMTL says:
          May 22, 2015 at 4:41 pm

          Hey Kev, hope you’re doing well! 😀
          It’s quite simple actually; you just have to issue the following command from note3 terminal with root :
          rm /persist/SHADOWLED
          Let me know how it goes 😉

    • julk77 says:
      May 26, 2015 at 10:33 pm

      Hi there !

      Since a bit more than 2 weeks I’m having stability issues too.
      To me an update of a software that we have in common is the culprit.
      I had some doubts about Greenify, Amplify, Gravitybox and such Xposed modules that have been updated recently, but I could not find the one unfortunately.
      I have some logs to share if you have some spare time. 🙂

      • CeKMTL says:
        May 26, 2015 at 11:05 pm

        Sure, maybe you could upload them to Dropbox or somewhere and I’ll have a look to see what is going on…
        Thx for reporting back and helping out!

  25. julk77 says:
    May 27, 2015 at 11:10 pm

    ¡ Hola !
    I think that I found the reason of the instability, I removed the latest version of 3C ToolBox, and since then I have not had any sod or reboot.
    Thanks !

    • CeKMTL says:
      May 27, 2015 at 11:12 pm

      Cool, great to hear & thx for troubleshooting!
      Let me know if there’s something else 🙂

      • julk77 says:
        May 29, 2015 at 3:53 pm

        Hello,
        Despite the reboots have disappeared, I’m still having some occasionnal sod’s 🙁
        I will continue to report here my discoveries.
        Thanks !

  26. julk77 says:
    May 29, 2015 at 5:40 pm

    Hi,
    here are some logs with a sod around the end (I think 🙂 ), http://goo.gl/j33lld
    Thanks!

  27. julk77 says:
    May 29, 2015 at 5:46 pm

    Last correction, I give up with goo.gl, here is the direct link
    http://julk77.free.fr/ShinToKernel_DEBUG.log.zip

    • CeKMTL says:
      May 29, 2015 at 5:49 pm

      Ok, downloaded now, merci! 😉

      PS1: Just as a reminder, do you have POWERGUARD active? … I say this because it seems you pressed a lot of times the HOME button…If POWERGUARD is active (check in Synapse) then you will need to press Power button twice in less than one second.

      The problem you had was a scheduler lockup, because of hotplugging logic “(do_hotplug+0x7c/0x1b8)”. => it has to do with thread concurrency via kernel scheduler (scheduler is in charge of scheduling/managing all threads)
      Newer version of PrecoGov should be a lot more resilient to this kind of concurrency problem.

      <7>[ 5556.179691] [] (__schedule) from [] (schedule_timeout+0x294/0x32c)
      <7>[ 5556.179706] [      ] (schedule_timeout) from [] (wait_for_common+0xa4/0x180)
      <7>[ 5556.179725] [      ] (wait_for_common) from [] (do_hotplug+0x7c/0x1b8)
      <7>[ 5556.179742] [      ] (do_hotplug) from [] (kthread+0xb4/0xb8)
      <7>[ 5556.179756] [      ] (kthread) from [] (kernel_thread_exit+0x0/0x8)

      Right now I am speaking of memory (am not looking at ShinTo Kernel’s source code), so I could be totally mistaken.

      • julk77 says:
        May 29, 2015 at 8:03 pm

        Thank you, when the sod occurred, since I had Powerguard enabled, I thought that pressing more than 2 times on the power button would help, yes 🙂

  28. yoyoa says:
    June 2, 2015 at 9:35 am

    Hi,

    Any news for lollipop kernel ? 🙂

    • CeKMTL says:
      June 2, 2015 at 10:09 am

      Soon there will be an initial public beta 😉
      Very sorry about the long delay, been working on many different projects.

      • yoyoa says:
        June 2, 2015 at 11:27 am

        No matter take your time 🙂
        It’s just to know if this project still alive.

        Waiting 😀

        • CeKMTL says:
          June 2, 2015 at 11:30 am

          Yeah, it is alive and very important to me and I want to evolve it beyond what is expected. Am studying “Advanced Operating Systems” to understand more about the inner workings, among other things.

          • Flint777 says:
            June 2, 2015 at 6:13 pm

            Hey Dev!
            Is there a reason why the v40AO6 link for t-mobile not working? I can only download the n9005 link…thanks for the hard work!!

          • CeKMTL says:
            June 2, 2015 at 6:15 pm

            It should be working but maybe something got broken…will have to check that once I’m near a computer…right now away from home on the highway…thx for reporting!

  29. Flint777 says:
    June 3, 2015 at 2:24 am

    Alright Thanks!!

  30. Flint777 says:
    June 4, 2015 at 6:49 pm

    So much appreciated. Man, I’ve been following your work since XDA…No Dev has never been available as you are…thank you for your dedication

    • CeKMTL says:
      June 4, 2015 at 6:51 pm

      Thank you for your time and for following this crazy dev 😉
      Should be releasing some stuff soon, hehe 😀

  31. Gee Zaz says:
    June 6, 2015 at 5:08 am

    finally found a stable and awesome kernel. been using it for 2 days now and got no any problem so far! thanks shinto! u rock! \m/ d[0_0]b \m/

  32. Yosh says:
    June 26, 2015 at 11:30 am

    Hi, any news of this project?

  33. chris122 says:
    June 28, 2015 at 4:28 am

    My eye is on precog.me right now!!!

  34. kevp75 says:
    June 28, 2015 at 3:52 pm

    I think my F5 button is wearing out 😉
    Can’t wait bud!!!

  35. plgnply (@plgnply) says:
    June 28, 2015 at 5:17 pm

    *lurk mode* lol

  36. kevp75 says:
    June 28, 2015 at 6:56 pm

    Hey Bro, can I ask you for a hand?
    I’ve tried following almost every single tutorial out there in regards to compiling a kernel, and I’ve grabbed Stock Samsung kernel straight from their site, and all I’m attempting at this point is to compile it flat out… and it just continually errors on me during the build process… mostly with exfat.

    I’ve tried the following toolchains, and they all have the same effect. NDK, Linaro, SaberMod, & Hyper

    Can you point me in the right direction? I trust your judgement the most 😀

    These, so far are the steps I’ve taken:
    http://team-dompop.rocks/adventures-in-kernel-building/

    with all the t.c.’s I mention above….

    Hit me up in pm, or email or something 🙂

  37. chris122 says:
    June 29, 2015 at 5:13 am

    Well I broke my f5 so I’m going to bed, I was so excited….

  38. chris122 says:
    July 12, 2015 at 2:30 pm

    I guess not, no answer…

  39. chris122 says:
    July 17, 2015 at 2:19 am

    I’m asking about update kitkat kernel , you said in the week is it releases yet or you still working on it?

%d bloggers like this: